你的位置:首页 > 新闻资讯 > 行业资讯

减少因剪板机维修造成的一系列损失

2018/8/3 16:06:00点击:

  剪板机厂家现有产品以液压剪板机,数控剪板机为主,那么在运用的过程中, 怎么才能确保剪切的质量呢。剪板机厂家天然有自己的一套衡量标准。

  氧气缓冲器是对剪刀划座起氧气相等功效的,由于漏气严重,导致相等功效大大降落,影响了剪板机的事景况态,对剪板机剪刃的冲击十分十分大,方法颤动加重。

  同时,由于透漏严重,致使整机的紧缩氧气压力达不到工作压力,从而无法翻开离合器,怎么怎样工作。

  该准则走风部位严重是汽缸下盖,轴与孔间的密封处,原密封圈为轴用密封圈35,即50×35×10,安顿在汽缸下盖孔内,用孔用档圈压紧,而现有国标产品35为:43×35×10,外径相差7mm。在施行流程中,钢套的丰厚度必定要得当,要做到档圈不但能安顿上,而而且要使钢套能够大约压紧剪板机O型密封圈不产生透漏。

The wind position of this criterion is seriously under the cylinder cover, the seal between the shaft and the hole. The original seal ring is 35 of the shaft seal ring, that is 50 x 35 x 10. It is under the cylinder Gekonne, and the hole is pressed with the gear ring, while the existing national standard products 35 are 43 x 35 * 10 and the external diameter is 7mm. In the implementation process, the size of the steel sleeve must be appropriate, not only to make the gear ring to settle, but also to make the steel sleeve about the cutting plate machine O seal ring does not leak.